Water is often referred to as a universal solvent due to its ability to dissolve and absorb molecules from a wide range of substances. The term “Total Dissolved Solids” (TDS) in water refers to the concentration of dissolved particles present in a given volume.These particles can be classified into two major types: organic and inorganic.
Organic TDS refers to dissolved particles from living organisms or their byproducts, such as decaying plant matter or microorganisms. On the other hand, inorganic TDS includes dissolved minerals, salts, and other non-organic substances. Both organic and inorganic TDS levels can significantly impact the quality and characteristics of water, making monitoring and managing TDS an essential aspect of water quality assessment and treatment.
Explanation of TDS levels in the water
Some water purifiers may be designed to remove only certain types of impurities, while others may be more comprehensive. In the following, we will describe more about TDS and its relation with water purifiers.
Understanding TDS Levels
High TDS levels in drinking water can affect its taste, odour, and appearance and may indicate contaminants that can harm human health. However, some level of TDS is necessary for water to be healthy and safe for consumption. The optimal TDS level in drinking water depends on several factors, including the type of minerals present and local regulations. The ideal TDS level in a water purifier is typically between 50 to 150 ppm (parts per million). However, this may vary depending on the specific water source and the quality of the purifier, but levels higher than 1000 ppm may indicate a need for treatment or further investigation.
Water purifiers use various methods to reduce TDS levels in the water, such as reverse osmosis, distillation, and activated carbon filtration. The ideal TDS level for drinking water is between 50-150 ppm, according to the World Health Organization (WHO). However, the acceptable TDS level may vary depending on local regulations and the specific needs of individuals.
It’s important to note that while a low TDS in the water purifier may indicate that it is clean and safe to drink, it doesn’t necessarily guarantee that the water is free from harmful contaminants. It’s important to use a reliable water purification system that can remove dissolved solids and harmful bacteria, viruses, and other contaminants to ensure the water is safe to drink.
Importance of water purifiers in maintaining optimal TDS levels
Water with high TDS levels should not be consumed since it can lead to several health issues, including dehydration, kidney stones, and gastrointestinal ailments. Conversely, water with low TDS levels may taste bland and not contain enough minerals for human consumption.
The extra minerals and salts that cause high TDS levels are among the pollutants and toxins water filters intend to eliminate. Water purifiers may efficiently remove contaminants from water and maintain ideal TDS in water purifiers for safe and healthful drinking water by utilising various filtering technologies, including RO (Reverse Osmosis) and UV (Ultraviolet) radiation.
Overview of routine servicing and its significance- Importance of immediate resolution
Routine servicing of any appliances refers to the regular maintenance and inspection of equipment, systems, and machinery to ensure that they are in good working condition and operating efficiently. This servicing type may involve changing filters, lubricating moving parts, replacing worn-out components, and cleaning surfaces.
Immediate resolution is critical when it comes to water purifier maintenance and repairs. Your water purifier needs regular maintenance, especially treating water with a high TDS level. If a problem is identified during routine servicing, it’s important to address it urgently. Delay in repairs can lead to increased downtime, higher repair costs, and safety hazards.
The significance of routine water purifier service cannot be overstated, as it helps to prevent equipment failures, reduce downtime, extend machinery lifespan, and improve workplace safety. By regularly maintaining and inspecting equipment, potential problems can be identified early, and corrective action can be taken before more significant issues arise.
Final thoughts and recommendations
If you need to maintain the correct TDS in the water purifier for your home, then nothing can be a better solution than Pureit. Here we are about to share the perfect Pureit water purifier for optimum TDS control:
Pureit Ultima Eco Mineral RO+UV+MF Water Purifier with 10L Storage
The Pureit Ultima Eco Mineral RO+UV+MF Water Purifier with 10L Storage is a high-end water purifier that uses multiple stages of purification to provide safe and clean drinking water. Here’s an overview of its key features:
- Purification Technology: The purifier uses a combination of Reverse Osmosis (RO), Ultraviolet (UV), and Micro Filtration (MF) technologies to remove impurities and bacteria from the water. This combination ensures that the water is safe and clean for consumption.
- Mineral Cartridge: The purifier is equipped with a Mineral Cartridge that adds essential minerals like calcium and magnesium back into the purified water. This makes the water healthier and more delicious.
- Large Storage Capacity: The purifier has a storage capacity of 10 litres, which means that you don’t have to refill the purifier frequently.
- Digital Display: The purifier has a digital display showing the water level, the purification process, and the filter life. This makes it easy to monitor the purifier’s performance.
- Eco Recovery Technology: The purifier is equipped with an Eco Recovery Technology that recovers up to 70% of the water normally rejected during purification. This helps in conserving water and reduces wastage.
- Advanced Alert System: The purifier has an Advanced Alert System that warns you when the filter needs to be replaced. This ensures that you always get safe and clean drinking water.
Overall, the Pureit Ultima Eco Mineral RO+UV+MF Water Purifier with 10L Storage is an advanced water purifier that uses cutting-edge technology to provide safe and clean drinking water.
Conclusion
In conclusion, TDS in water purifier are essential in assessing water quality. Low TDS levels could not deliver the essential minerals and salts our body needs, while high TDS levels might cause a bitter taste and other health-related problems.
Regular maintenance helps maintain the quality of water and ensures that the water purifier operates efficiently, providing clean and safe drinking water. Hence, following the manufacturer’s recommended servicing schedule is important to get the best performance from your water purifier and ensure your family’s health and safety.
